diy kitchen cabinet doors with glass
A pair of glass cabinet doors can add a designer touch to any kitchen. they can turn an ordinary cabinet into a decorative showcase or simply break up an otherwise monotonous row of solid doors. we recommend this alteration only for frame-and-panel cabinet doors (see figure a), where you can replace the inset wood panels with glass to make. Hi friends! i recently shared my kitchen makeover, and i had several requests to share how i replaced the raised panels on my kitchen cabinets with glass. this post contains some affiliate links for your convenience. click here to read my full disclosure policy. adding glass to just one set of cabinets had the biggest impact in my kitchen.. Cabinet pulls; cabinet hinges; power drill; optional: nail gun with 1” brad nails; orbital sander with fine grit sandpaper; how to make the diy glass cabinet doors. measure to determine the exterior dimensions of the cabinet doors. make sure to allow space for the hinges and some room between the doors if they are stacked on top of each other..
diy kitchen cabinet doors with glass
Glass cut size will depend on what style of cabinet you have and if you want to use a router or not. if you have a panel that tapers off similar to the one below (tapering can be seen below the green banners) you will most likely not need a router. in this case you would buy a piece of glass 1/2 – 3/4 an inch wider and taller than your measurements.. And the cabinet door becomes two pieces… the doors were painted with chalk paint and went from orange oak stain to an off-white and distressed. glass was installed by robinson glass with 4 doors: 9″ x 21″ glass inserts with “seedy” (glass with a slight bubble pattern) at approximately $14.50 each panel ($54 total)..
0 comments:
Post a Comment