woodworking bench overhang
When designing a french workbench (or any other style, really), one of the most common hang-ups for new woodworkers is determining how much the benchtop should overhang the base at the ends of the bench. when i design a workbench that doesn’t have an end vise, i usually use an overhang of 12” to 15”,…. Work benches are a very personal thing, because we all use them for different kinds of work. i just rebuilt my old bench into a new one with a lot of drawers under it. this time i added 9” overhangs on each end for vices. i( i may add a second vice in the future.) the front of the bench has a 4” overhang to make clamping work much easier.. Look for a woodworking bench design that has a thick work surface made of dense material. such a surface will last a long time and provide great support when hand nailing. 3. work surface overhang. a woodworking bench must have overhang on the front and ends, especially if it doesn’t have woodworking vises..
woodworking bench overhang
On a traditional bench with a tool till there is a very narrow area where you can put the legs, if you set them back on that end for the vise you'll end up with your front and rear leg on that end about 5" apart, not as stable as an overhang and full width legs. on a newer style tail vise with the metal guides you could get away with less overhang.. And, in general, your bench only has to be super-flat along the front 12” of the length of the benchtop. after five or 10 years, your bench will hardly move at all. 9. trying to re-invent the wheel with new workbench designs. woodworkers love to tinker. and we get ideas in our head that we just can’t forget about until we build them. that.
0 comments:
Post a Comment